Concealed Hardware
The cover hides the four screws or anchor bolts used to secure the base plate.
The Aluminum Base Cover finishes an Alumission surface-mounted post installation by covering the four exposed screws or anchor bolts that secure the base plate.
Its 1.310″ square center opening fits over the 1-1/4″ × 1-1/4″ steel stem attached to the base plate. After the cover is placed over the base assembly, the Alumission post slides over the steel stem and sits on top of the cover.
The cover is available in color-matched powder-coated finishes for a clean transition between the post and mounting surface.
Install the cover after the base plate is securely anchored and before the aluminum post is placed.
The cover hides the four screws or anchor bolts used to secure the base plate.
Rounded corners and a powder-coated finish create a clean transition at the bottom of the post.
Choose a finish that coordinates with the post and the rest of the Alumission system.
The cover does not replace the structural base plate, steel stem, or anchors.
The center opening provides clearance for the base stem while the post sits above the cover.
The 1.310″ square opening fits over the 1-1/4″ × 1-1/4″ steel stem attached to the compatible base plate.
Slide the cover over the stem, then install the Alumission post so it sits on top of the cover.
Use the cover with the compatible Alumission base plate and fasteners specified for the mounting surface.
Dry-fit the complete base, cover, and post assembly before final tightening.
The technical drawing defines the outside size, opening, height, wall thickness, and radii.
The outside dimensions are 4.375″ × 4.375″.
The cover is 1.00″ high.
The square center opening measures 1.310″ × 1.310″.
The drawing calls out R0.50″ corner radii and an R0.25″ edge radius.
Included: One Aluminum Base Cover in the selected powder-coated finish.
Sold separately: Base plate, 1-1/4″ × 1-1/4″ steel stem, post, screws or anchor bolts, and installation hardware.
Drawing-based dimensions for the aluminum cover used to conceal base-plate fasteners beneath a surface-mounted Alumission post.
Measurement note: Dimensions are nominal and shown in inches. Confirm the base plate, steel stem, post, anchors, and mounting surface before installation.
Answers about purpose, base-plate compatibility, dimensions, installation order, finishes, hardware, and care.
It covers the four screws or anchor bolts that secure a compatible base plate, giving the bottom of the post a clean finished appearance.
No. The base cover is a finishing component. The structural base plate, steel stem, anchors, and post are separate components.
The 1.310″ square center opening fits over the 1-1/4″ × 1-1/4″ steel stem attached to the compatible base plate.
Yes. Place the cover over the base assembly first, then slide the compatible post over the steel stem so the post sits on top of the cover.
It can be used with Alumission posts installed on the compatible base plate and 1-1/4″ × 1-1/4″ steel stem assembly. Verify the complete assembly before installation.
The cover measures 4.375″ wide by 4.375″ deep and 1.00″ high.
The center opening measures 1.310″ × 1.310″.
Secure the base plate with the required anchors, place the cover over the plate and steel stem, then install the Alumission post over the stem so it sits on the cover.
No. Fasteners are sold separately because the correct type and size depend on the base plate, mounting surface, loads, and project requirements.
Yes. Verify the base plate, cover opening, steel stem, post, and fastener clearances before final anchoring.
Available finishes are Black, Bronze, White, Dark Gray, and Light Gray.
Select the same powder-coated finish as the post for a coordinated appearance.
The product includes one Aluminum Base Cover in the selected finish. The base plate, steel stem, post, fasteners, and installation hardware are sold separately.
Use mild soap and water with a soft cloth or sponge. Avoid abrasive pads, harsh chemicals, and strong solvents.
No. It is a decorative finishing cover and must not be treated as a structural base, anchor, or reinforcement component.
Discussions
There are no questions yet.