Interlocking Snap Edges
The shaped edges engage adjoining profiles so the slats align as one connected privacy surface instead of remaining as separate, loosely spaced pieces.
6″ Aluminum Snap Slat 8′
0
(0)
Reviews
An 8′ interlocking 6″ aluminum slat designed for full-privacy fences, gates, screens, and compatible railing projects. Snap edges join each slat for added alignment and durability, and the profile can be installed horizontally or vertically in Black or White.
$51.00
The 6″ Aluminum Snap Slat 8′ is engineered specifically for full-privacy aluminum fences, gates, screens, and compatible panel systems. Its wide 6-inch face creates continuous coverage, while the interlocking snap edges connect one slat to the next so the finished surface has no planned gaps and a clean, uniform architectural appearance.
Unlike independent slats that rely on spacers to establish a visible gap, this profile is designed to snap together as a system. The engaged edges help keep adjoining slats aligned, add contact along the connection, and reduce movement within a properly framed assembly. The result is a stronger, more durable privacy panel that installs quickly and maintains a consistent finished face.
The broad profile provides more coverage per piece, which means fewer individual slats are needed across an opening. Combined with lightweight aluminum construction, this makes the 6″ snap slat an economical choice for large residential runs, commercial screening, and industrial projects where speed, privacy, durability, and long-term value are important.
Use it for backyards, side yards, commercial properties, industrial facilities, equipment screens, service areas, privacy walls, fences, compatible railings, sliding gates, swing gates, and pedestrian gates. The profile can be installed horizontally for long modern lines or vertically for a tall, continuous privacy layout when the complete frame and fastening system are designed for that orientation.
Aluminum is naturally corrosion resistant and noncombustible. When assembled into a continuous full-privacy panel, the solid surface can help reduce direct wind passage, wind-driven debris, embers, and direct flame exposure compared with an open-gap design. The slat itself is not a complete fire-rated or structural wind-rated assembly; final performance depends on the posts, frames, fasteners, spans, footings, installation, surrounding materials, and project-specific engineering.
Each profile is manufactured from 6063-T6 aluminum and finished with an exterior powder coat for low-maintenance outdoor use. It will not rot, swell, splinter, or rust like ordinary steel, and routine care normally requires only mild soap and water.
Product Highlights
- Full-privacy 6.000″ architectural face
- Interlocking snap edges connect adjoining slats
- No planned gaps between properly assembled profiles
- Added alignment, durability, and panel stability
- Lightweight and economical for large projects
- Installs horizontally or vertically
- 6063-T6 aluminum construction
- Exterior powder-coated finish
- Corrosion resistant and noncombustible
- Available in an 8′ length in Black or White
Common Applications
- Full-privacy backyard and side-yard fencing
- Residential privacy walls and screens
- Commercial property screening
- Industrial and equipment enclosures
- Sliding gate infill
- Swing and pedestrian gate infill
- Compatible railing and guard infill where permitted
- Horizontal or vertical privacy-panel construction
A Continuous Snap-Together Aluminum Surface
The profile is designed for projects that require privacy rather than decorative spacing. Each slat engages the next to create consistent coverage across the opening.
No Planned Gaps
The system is intended for full-privacy construction. When correctly assembled in a compatible frame, the wide faces close the opening without the intentional reveals used in semi-private slat designs.
Broad 6-Inch Coverage
A 6.000″ face covers more area with fewer profiles, helping reduce piece count, handling, and installation time on long fence and gate runs.
Horizontal or Vertical
Install the profiles horizontally for a modern linear appearance or vertically for height and continuous coverage. The surrounding posts, frame, fasteners, and supports must match the chosen orientation.
Built for Privacy, Value, and Versatile Project Use
The lightweight snap-slat system works across residential, commercial, and industrial applications when used with a properly designed supporting assembly.
Backyards and Side Yards
Create a durable privacy barrier for patios, pools, side passages, property lines, and outdoor living areas without the routine staining or rot associated with wood.
Commercial and Industrial Screening
Use the solid slat face to screen equipment, service areas, storage zones, loading areas, and other spaces where privacy and a clean finished appearance are important.
Fences, Railings, and Gates
The same profile can serve as infill for fences, compatible railing applications, sliding gates, swing gates, pedestrian gates, privacy screens, and custom framed panels.
Fire and Wind Considerations
Aluminum is noncombustible, and the continuous surface can help reduce direct wind, ember, and flame passage. Complete fire and wind performance must be evaluated for the installed system and site conditions.
Included: One 8′-long 6″ Aluminum Snap Slat in the selected Black or White powder-coated finish.
Sold separately: Compatible posts, frames, the matching top snap slat, screws, caps, bases, brackets, reinforcement, and all other installation hardware.
6″ Aluminum Snap Slat 8′
Principal profile dimensions, snap-edge construction, material, finish, privacy configuration, length, orientation, and compatible applications.
Overall profile width
6.000″
Overall profile height
0.803″
Wall thickness
0.053″ typical
Profile construction
Interlocking snap-edge aluminum extrusion
Privacy configuration
Full privacy only; no planned gap
Material
6063-T6 aluminum
Finish
Exterior powder coated
Online length
8′
Available finishes
Black and White
Installation orientation
Horizontal or vertical
Compatible applications
Fence, privacy screen, compatible railing, sliding gate, swing gate, and pedestrian gate infill
Planning note: Dimensions are nominal and normal extrusion tolerances apply. Confirm the finished opening, slat direction, frame allowances, top finishing profile, end engagement, fasteners, support spacing, footings, local code, and any required structural or fire engineering before fabrication.
6″ Aluminum Snap Slat Questions & Answers
Detailed answers about full privacy, snap-together construction, residential and commercial uses, horizontal and vertical installation, dimensions, fire and wind considerations, ordering, cutting, and maintenance.
Product & Privacy
What is the 6″ Aluminum Snap Slat?
It is an 8′-long, interlocking aluminum profile with a nominal 6.000″ face and 0.803″ overall height. It is used as full-privacy infill in compatible fences, gates, screens, and framed panel systems.
Is this slat designed for full privacy only?
Yes. The snap-edge profile is intended to connect directly to the adjoining slat without an intentional gap. It is not designed as a spaced or semi-private slat system.
How does the snap-together system work?
One formed edge engages the mating edge of the next slat. This keeps adjoining profiles aligned and creates a continuous privacy surface within a compatible frame.
Does snapping the slats together make the panel stronger?
The engaged edges add contact and alignment between adjoining slats and can reduce independent movement. Final panel strength still depends on the complete frame, posts, fasteners, spans, footings, and installation.
How is this different from the 5.5″ Aluminum Slat?
The 5.5″ architectural slat is normally installed as an independent profile and can be spaced to create different privacy levels. The 6″ snap slat interlocks with the next profile and is intended specifically for a continuous full-privacy panel.
Is each 6″ snap slat sold individually?
Yes. The displayed variation price is for one 8′ slat in the selected finish unless the product page specifically states otherwise.
Why is the 6″ snap slat considered economical?
Its wide face covers more of the opening with fewer pieces, and the lightweight snap-together design helps reduce handling and assembly time on larger projects.
Applications & Installation
Can I use the 6″ snap slat for a fence?
Yes. Full-privacy residential, commercial, and industrial fences are primary applications for this profile.
Can it be used for sliding gates?
Yes. It can be used as full-privacy infill in a properly designed sliding-gate frame with suitable support, fastening, and operator clearances.
Can it be used for swing or pedestrian gates?
Yes. The slat can be installed in compatible swing-gate and pedestrian-gate frames. The frame and hinges must be sized for the finished gate dimensions and wind load.
Can the slat be used for railings?
It can be used as privacy infill in compatible railing or guard applications when the complete assembly complies with applicable height, opening, load, and local code requirements.
Is it suitable for commercial and industrial projects?
Yes. Common uses include equipment screens, service-yard barriers, storage-area screening, loading areas, industrial enclosures, and long privacy-fence runs.
Can the 6″ snap slat be installed horizontally?
Yes. Horizontal installation creates long, clean architectural lines and is a common orientation for full-privacy fences and gates.
Can it be installed vertically?
Yes. Vertical installation is possible when the complete frame, supports, end engagement, fasteners, and top and bottom conditions are designed for vertical slats.
Do I need a matching top snap slat?
Use the compatible top finishing member when required by the selected snap-slat assembly. It closes and finishes the top of the panel and is sold separately.
Which posts and frames are compatible?
Use posts, gate frames, channels, and finishing components designed for the 6″ snap-slat system. Confirm the exact assembly before ordering the material list.
Are posts and hardware included?
No. Posts, frames, top snap slats, screws, caps, bases, brackets, reinforcement, and other installation components are sold separately.
Dimensions, Material & Performance
What are the profile dimensions?
The nominal profile is 6.000″ wide and 0.803″ overall high with a 0.053″ nominal wall thickness. Normal extrusion tolerances apply.
What aluminum alloy is used?
The profile is manufactured from 6063-T6 aluminum, an alloy commonly used for architectural extrusions because of its finish quality, corrosion resistance, and practical strength.
Is the snap slat lightweight?
Yes. Aluminum provides broad privacy coverage at substantially less weight than a comparable solid metal section, which makes the profiles easier to handle and assemble.
Will the aluminum rust?
No. Aluminum does not rust like ordinary steel. The powder-coated finish provides an additional exterior protective and decorative layer.
Can the slat block fire?
Aluminum is noncombustible and will not fuel a fire like wood. A continuous panel can help reduce direct flame and ember passage, but the slat alone is not a certified fire-rated wall or complete fire-rated assembly.
Can the full-privacy panel block wind?
The continuous slat surface reduces direct airflow compared with an open-gap fence. That also increases wind pressure on the structure, so posts, frames, spacing, footings, fasteners, and engineering must be designed for the site wind conditions.
Does the powder-coated finish require painting or staining?
No routine painting or staining is required. Clean the surface with mild soap and water using a soft cloth or sponge, and avoid abrasive pads and harsh chemicals.
Can the profile be cut to size?
Yes. Use suitable aluminum-cutting equipment with a fine-tooth blade, support the extrusion during the cut, and deburr the cut edges before assembly.
Will a cut edge rust?
No. A cut aluminum edge will not rust like steel. Follow the project finish requirements if a touch-up coating is desired for appearance.
Ordering & Project Planning
What length is available?
This product is sold online in an 8′ length.
What colors are available?
The available online finishes are Black and White.
Is this product made in the USA?
Yes. Alumission aluminum profiles are made in the USA.
How many snap slats do I need?
Start with the finished stacking dimension and divide by the nominal 6.000″ profile coverage, then account for the exact top and bottom finishing members, frame engagement, cut plan, and normal tolerances. Confirm the complete assembly before ordering.
Should I plan the orientation before ordering?
Yes. Horizontal and vertical layouts use different frame conditions, cut lengths, support details, and quantities. Finalize the orientation and opening dimensions first.
Can Alumission help prepare a material list?
Yes. Provide the opening dimensions, panel or gate type, orientation, quantity, finish, and site details so the compatible posts, frames, slats, top members, and hardware can be reviewed together.
Reviews
There are no reviews yet.