Home » Shop » Privacy Aluminum Sliding Gate – New York Style

Privacy Aluminum Sliding Gate – New York Style

5 (1) Reviews

Choose a privacy aluminum sliding gate in New York Style. The New York design uses a close-set pattern of 5.5-inch aluminum slats with no deliberate spacing between them. The closed infill limits views through the gate from the driveway and street.

Select an opening group up to 12, 16 or 20 feet wide and a 4, 5 or 6-foot height, then compare six finishes. V-groove wheels are included with both hardware options. Track, catcher, guide and chain brackets come with Add Hardware. Cutting, assembly and installation are required. Motors and automation equipment are not included.

STARTING AT $2,706.55

Real New York Style Sliding Gate Projects

See completed Alumission New York style sliding gates at residential and shared driveway entrances.

View All Sliding Gate Projects →

Privacy Aluminum Sliding Gate – New York Style

Choose this privacy aluminum sliding gate in New York Style for a cut-to-fit, ground-tracked driveway entrance. The New York design uses a close-set pattern of 5.5-inch aluminum slats with no deliberate spacing between them. The closed infill limits views through the gate from the driveway and street.

Closed horizontal slats for visual screening

Choose New York when limiting sightlines matters more than an open-slat appearance. Its broad, close-set profiles give the driveway a continuous horizontal surface. Visual screening does not establish a security rating, and a closed gate can change wind loading; have your installer assess the finished leaf, supports and site exposure.

First, compare your driveway opening, available sideways runback and preferred screening level. Then choose the size, finish and hardware option that matches the plan. This privacy aluminum sliding gate uses mechanical assembly with no welding; cutting, drilling and installation are required.

Compare all five aluminum sliding driveway gate kits for alternative slat patterns. For broader access options, visit our aluminum gate kits overview.

Manual operation or motorized automation

This is a gate assembly kit for a wheeled, track-guided installation. It can be planned for manual use or a compatible automatic sliding gate operator. The motor, drive chain, controls, power supply and safety sensors are not included. Have a qualified gate-automation installer match the operator to the completed gate, expected usage and site conditions.

Plan your driveway or vehicle entrance

For a residential driveway, confirm the opening and the clear space beside it for the gate to slide. Planning a commercial or industrial entrance? Contact Alumission with your measurements and project requirements to confirm suitability before ordering. Choose the finished gate configuration for the site rather than assuming every size suits every installation.

A frame built to capture and support the slats

The top, bottom and vertical frame members are made from Alumission Aluminum Post 2 Channels. One or more center members reinforce the slats and divide the gate into bays. The slats fit into the horizontal and vertical frame channels; #8 screws secure the aluminum assembly connections. Galvanized steel inserts and #12 screws join frame extensions where required.

The system uses Alumission’s aluminum slats and spacers, with the profile widths and pattern specified for your selected style. It is a screw-assembled kit that you cut and assemble to fit your opening.

Choose your size, finish and hardware

Available for openings up to 12′, 16′ or 20′ wide, each at 4′, 5′ or 6′ high. The assembly video adds a 24″ tail to the measured opening when cutting the horizontal frame. Allow for that complete gate length and its runback space.

Choose Black, Bronze, Dark Gray, Light Gray, White or Wood. Wood uses wood-look aluminum slats with a black frame. The price depends on the components, finish and hardware option included in your selected kit. Cutting the kit smaller does not change its price.

Wheels remain included with No Hardware. Add Hardware adds the track, catcher, guide and chain-bracket package: included in the displayed price when you select Add Hardware. Motor and automation equipment are not included.

Watch the complete Alumission sliding gate assembly guide →

New York Style questions

Is the New York gate a certified security barrier?

The closed pattern provides visual screening. It does not by itself establish a security certification, wind rating or approval for a particular site. Review support, locking and automation requirements with your installer.

What should I check before ordering this privacy aluminum sliding gate?

Confirm the clear opening, full gate length, sideways runback, track route, supports and desired finish. Wheels are included with both hardware options. Review the selected variation’s packing list for the optional track, catcher, guide and chain brackets. Motors, power and safety equipment are separate.

WHAT’S INCLUDED:

Open the matching size below to see exactly what is supplied. Quantities for items labeled “Pack” or “Set” refer to packs or sets.

Up to 12′ Wide x 4′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 2
Aluminum Post 2 Channel 6′ 5
Aluminum Snap Cover For Post 2 Channels 8′ 4
Aluminum Snap Cover For Post 2 Channels 6′ 10
Aluminum Post Cover For Channels 6′ 5
Aluminum Post Cover For Channels 8′ 2
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 2
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 6′ 16
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 3
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 16′ Wide x 4′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 6
Aluminum Snap Cover For Post 2 Channels 8′ 12
Aluminum Post Cover For Channels 8′ 6
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 8′ 16
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 4
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 20′ Wide x 4′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 4
Aluminum Post 2 Channel 6′ 7
Aluminum Snap Cover For Post 2 Channels 8′ 8
Aluminum Snap Cover For Post 2 Channels 6′ 14
Aluminum Post Cover For Channels 6′ 3
Aluminum Post Cover For Channels 8′ 5
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 5′ 32
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 2
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 5
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 12′ Wide x 5′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 2
Aluminum Post 2 Channel 6′ 5
Aluminum Snap Cover For Post 2 Channels 8′ 4
Aluminum Snap Cover For Post 2 Channels 6′ 10
Aluminum Post Cover For Channels 6′ 5
Aluminum Post Cover For Channels 8′ 2
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 2
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 6′ 20
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 3
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 16′ Wide x 5′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 4
Aluminum Post 2 Channel 6′ 4
Aluminum Snap Cover For Post 2 Channels 8′ 8
Aluminum Snap Cover For Post 2 Channels 6′ 8
Aluminum Post Cover For Channels 6′ 4
Aluminum Post Cover For Channels 8′ 4
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 8′ 20
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 4
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 20′ Wide x 5′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 4
Aluminum Post 2 Channel 6′ 7
Aluminum Snap Cover For Post 2 Channels 8′ 8
Aluminum Snap Cover For Post 2 Channels 6′ 14
Aluminum Post Cover For Channels 6′ 3
Aluminum Post Cover For Channels 8′ 5
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 5′ 40
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 2
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 5
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 12′ Wide x 6′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 2
Aluminum Post 2 Channel 6′ 5
Aluminum Snap Cover For Post 2 Channels 8′ 4
Aluminum Snap Cover For Post 2 Channels 6′ 10
Aluminum Post Cover For Channels 6′ 5
Aluminum Post Cover For Channels 8′ 2
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 2
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 6′ 24
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 3
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 16′ Wide x 6′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 4
Aluminum Post 2 Channel 6′ 4
Aluminum Snap Cover For Post 2 Channels 8′ 8
Aluminum Snap Cover For Post 2 Channels 6′ 8
Aluminum Post Cover For Channels 6′ 4
Aluminum Post Cover For Channels 8′ 4
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 8′ 24
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 1
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 4
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1
Up to 20′ Wide x 6′ High

Included in the kit

Component Supplied length Quantity
Aluminum Post 2 Channel 8′ 4
Aluminum Post 2 Channel 6′ 7
Aluminum Snap Cover For Post 2 Channels 8′ 8
Aluminum Snap Cover For Post 2 Channels 6′ 14
Aluminum Post Cover For Channels 6′ 3
Aluminum Post Cover For Channels 8′ 5
1-1/4″ × 1-1/4″ Galvanized Square Steel Tube – 1/8″ Wall 4′ 4
Aluminum Cap For Post 2 Channel — 4
5.5″ Aluminum Slat 5′ 48
#8 × 1/2″ Stainless Steel Pan-Head Self-Drilling Screws – Pack of 100 — 2
#12 × 1″ Stainless Steel Self-Drilling Screws – Pack of 50 — 1
Stainless Steel L Brace For Corners — 4
3″ Stainless Steel V-Groove Sliding Gate Wheel — 2

Hardware package — included only with Add Hardware

Component Supplied length Quantity
8′ 304 Stainless Steel Sliding Gate V-Track with Anchor Rods 8′ 5
Aluminum Sliding Gate Catcher with Protective Foam — 1
6″ Adjustable Sliding Gate Guide Roller Assembly – Dual Nylon Rollers — 1
Sliding Gate Motor Chain Attachment L-Brackets – Set of 2 — 1

Box Weight

Varies by selected size.

Box Dimension

Varies by supplied profile lengths and selected size.

TECHNICAL SPECIFICATIONS & INSTALLATION

Questions about this product?

For help confirming compatibility, sizes or required components, contact Alumission technical support with the product name and your project details.


Discussions

There are no questions yet.

Ask a question

Your email address will not be published. Required fields are marked *

1 review for Privacy Aluminum Sliding Gate – New York Style

  1. Adam Fremont –

    Thank You Vanessa, we love our telescopio gate. We have an issue with opening space and Vanessa recommend for us to go with this kind of gates It’s walking. Amazing.

    Customer review photo for Privacy Aluminum Sliding Gate – New York Style
Add a review

Your rating *

JPG, PNG, or WebP up to 5 MB. Your photo will appear publicly with your review.

Related
Products